Flex-A-Rail II UVR PVC Track #180-2-W 180" White
Item
578019
Flex-A-Rail II UVR PVC Track #180-2-W 180" White is available to buy in increments of 1
This product is not eligible to ship courier and will require Long Truck Load (LTL) shipping. You will be contacted by customer service to arrange freight service for your item(s).
Flex-A-Rail provides quick and easy installation of boat windshields, tops, covers and curtains. It can also be used to mount awnings and truck covers.
A PVC extrusion, Flex-A-Rail is non-corrosive and can be run around tight corners without the use of crimping tools. Only small amounts of heat are needed to bend or straighten. Designed for use of 7.5mm Keder. Pre-drill holes just slightly larger than the shank of the screw (screw item# 265453, screw hex driver item# 265452). Holes should be 2 inches to 2-1/2 inches apart for tight radiuses, and 4 inches to 8 inches apart depending upon the configuration of the mounting surface.
A PVC extrusion, Flex-A-Rail is non-corrosive and can be run around tight corners without the use of crimping tools. Only small amounts of heat are needed to bend or straighten. Designed for use of 7.5mm Keder. Pre-drill holes just slightly larger than the shank of the screw (screw item# 265453, screw hex driver item# 265452). Holes should be 2 inches to 2-1/2 inches apart for tight radiuses, and 4 inches to 8 inches apart depending upon the configuration of the mounting surface.
Length | 180 in. |
---|---|
Size | 7.5 mm |
Style # | 180-2-W |