• The elements (or “zipper chain”) refer to the teeth or coil that interlock with each other and run along the middle of the zipper.
• The slider is the pulling mechanism that opens and closes the interlocking elements (more on slider parts below).
• The zipper tape is the fabric attached to either side of the elements.
• Top and bottom stops refer to the small pieces of metal or plastic placed at either end of the zipper to stop the slider from falling off the zipper chain.
• Top and bottom extensions refer to the pieces of fabric at either end of the zipper unit.
• The insertion pin is the small, straight piece of metal or plastic where the slider is led into the chain, while the retainer box is the square-shaped piece that stops the slider at the end of the chain and holds it in place.

When shopping for sliders, note that there are ZIPLON^®-compatible sliders and VISLON^®-compatible sliders.

• VISLON^® zippers have a closure structure resembling “teeth.” They’re made of plastic teeth injected onto the tape. Stiffer than coil zippers (see below), they typically work better for straight applications.

• ZIPLON^® zippers are often referred to as “coil” zippers because they have a closing structure where the teeth resemble “coiled” plastic. This coiling structure allows the zipper to bend well around curves. This makes them great for “smile” curtains, boat covers, cushions, or U-shaped openings in boat enclosures.

• Metal zippers are commonly used in applications that don’t require weather capability.
• Concealed zippers, also called “invisible zippers,” are designed so that the elements are hidden under the tape.

When shopping for sliders, note that there are ZIPLON^®-compatible sliders and VISLON^®-compatible sliders.

• Slider Parts
  • Crown (top)
  • Puller or pull-tab
  • Body (part that engages with zipper elements)
  • Throats
• Slider Options
  • Single Slider (one per zipper unit) option
    
  • Double Slider (two per zipper unit) option
    
  • Autolock Slider (or AutoLok)

    This slider type stays in place where you put it. It will not open the zipper chain unless you pull the slider.

  • Non-Locking Slider

    This slider has no locking mechanism to keep it from sliding.

  • Round Slider
    
  • Square Slider
    

• Zipper Chain Options
  • A continuous zipper, or plain zipper chain, has no finished end, which makes it the most modifiable. It’s great for bags, pillows, tents, and custom projects.
  
  • A finished, closed, or separating zipper is finished at either end to stop the slider. The two ends separate at the end, making them ready-made for jackets and enclosures.
  
  • Either side of the zipper end comes in closed or open varieties.
  

Handbags and similar products often have zipper pulls (or pull cords). These pulls allow you to easily use the zipper by extending the length of the slider. This makes it much easier to use a purse, backpack, or any other zipper with a slider that's too small or difficult to reach. We offer quality-made, easy-to-use zipper pull cords for your next project.

• Plastic zippers cannot be repaired if a tooth breaks off while metal ones can. However, plastic zippers typically last longer and are more resistant to dirt, corrosion, and UV rays.
• For sticky zippers, try applying a zipper cleaner and lubricant.
• Before sewing on the zipper, apply seam tape to the fabric to hold in place.
• The larger the radius of the zipper tape, the less chance there is of puckering.

YKK is the world’s largest supplier of quality zippers as well as other fastening products. Because their products are so ubiquitous, it’s useful to know how to read their product names, which includes YKK zipper sizes and features.

YKK zippers and sliders are named based on a certain set of criteria. Item #280085, for example, is listed as YKK^®VISLON^® #8 Separating Zipper Automatic Lock Short Single Pull Metal Slider #VFUVOL-86 DA E 5/8” 60" Black.

Here’s what that means:

• #8 = chain size (8mm chain width)
• Separating = zipper has finished ends
• Automatic Lock = slider locks in place (also called AutoLok)
• Short Single Pull Metal = all descriptors for the type of slider
• VF = VISLON^®
• U = reversible automatic lock
• V = black nickel
• OL = open-end left insert
• 86 = zipper gauge
• D = die-cast zinc
• A = another reference to automatic lock
• E = enamel
• 5/8” = width of tape on either side of the chain
• 60” = total roll length
• Black = color

• Zipper Nomenclature
  
• Types of Sliders
  
• How Are Zippers Sized?

  The size of the zippers you need will depend on the size of your project. Make sure to measure the area you want to enclose before ordering zippers. The teeth, slider, and other parts of the zipper can also come in a variety of sizes. Full zipper tape rolls are typically sized by chain or coil width, tape width, and length. For a sizing example, refer to item #280085 above.

• What Materials Are Used in Zippers?

  The materials used in zippers need to strike a balance between durability and ease of use. Zipper tape is typically made from polyester or acrylic. The teeth and sliders can be made from either plastic, resin, or metal and sometimes include UV-resistant, chip-resistant enamel paint. These materials are used for their light weight, strength, smooth surfaces, and weather capability.

The zippers and parts outlined above can all be used in custom projects or for zipper replacements and repair.

For industrial purposes, plastic zipper chains and sliders with polyester tape are generally the most stable. Plastic is lightweight, corrosion resistant, and weather stable while polyester offers high strength and low stretch. However, choosing the right zipper will depend on your specific application.

The following is a basic guide and is not intended to be a comprehensive list:

• ZIPLON^® (coil) = curved applications (marine enclosure panels, “smile” curtains, tents)
• VISLON^® (teeth) = straight applications (biminis, enclosures, apparel, cushions)
• Plastic = marine, saltwater, outdoor settings (awnings, boat covers)
• Metal = applications that don’t encounter extended exposure to the outdoors (apparel and fashion, bags)
• Concealed zippers = uses where aesthetic is important (apparel and fashion, bags, decorative pillows and cushions)

Almost everyone has experienced the unfortunate event of a zipper breaking while zipping or unzipping it. There are a few common reasons why a zipper may break.

Zipper is stuck: If your zipper is stuck, there is a good chance that there is something blocking the slider from moving. Fabric or loose threads are common reasons why a zipper gets stuck. You can use a zipper lubricant (like IOSSO^® E-Z Snap, Zipzap, or YKK^® ZIPPY COOL^®) to lubricate the slider and free your zipper.

Zipper will not close or keeps popping up: The zipper may have a thread or cloth stuck in it, crooked teeth, or the slider may be broken. If fixing the teeth or freeing the zipper does not work, you may need to replace the zipper.

Slider pulls off: If the slider is coming off, you should replace it with a new one. Make sure to choose a slider that is the correct size for your zipper and its teeth.

• When making an enclosure, is it best to use #10 or #5 zippers?

  #10 zippers are typically best for enclosures. #5 zippers are smaller and typically used in cushions or seating applications.

• Should I use zippers with metal or plastic sliders?

  Metal sliders are better suited for environments where high resistance to water and corrosion is not needed. Plastic sliders are ideal for marine conditions as they’re rust resistant.

• What is the difference between YKK VISLON^® and YKK ZIPLON^® zippers?

  VISLON^® (“teeth”) zippers are stiffer and better for straight applications. ZIPLON^® (“coil”) zippers are more flexible, which makes them great for curved applications.

• What is the difference between an auto-locking and a non-locking zipper slider?

  An auto-lock slider is like the one you’d find on a jacket (the slider stays in place where you leave it). A non-lock slider does not lock in place on the chain.

• What is the best kind of zipper for saltwater applications?

  Zippers with plastic sliders are best for saltwater conditions as they do not corrode or rust.

• Are zippers repairable?

  Yes. Zipper sliders, top stops, and bottom stops can all be replaced easily (all can be found in our Zipper section).

The purpose of this guide is to give fabricators some general guidelines and product information.

This guide should not be considered as the sole source of information on zippers. This guide is strictly informational.